InBody S10

Assessment 07 August 2016 EgyMeDotCom

Rate this item

(0 votes)

400210 comments

How does it work?

InBodyS10 provides comprehensive body water information such as intracellular water, extracellular water for each body part, total body water, extracellular water ratio to total body water, and history of body water condition.
These outputs are used in numerous DIALYSIS CLINIC and nutritional support team of hospitals to provide an upgraded treatment for the patients. InBody S10 is highly preferred for patients in bed.

Technology

Bioelectrical Impedance Analysis (BIA) that depends on measuring the impedance of the body to an applying micro-currents and then measure the voltage drop. After that the Body water, Fat Free Mass and other body components can be obtained.

InBody overcome the conventional BIA with the following four technologies:

1. Direct Segmental Measurement (DSM-BIA)

It consider the human body as 5 cylinders (Right Arm, Left Arm, Trunk, Right Leg, and Left Leg) which are different in width & length & measure the impedance of each part separately & accurately.

This also allow accurate measurement of the trunk impedance which very small and any small change/error in its measurement will affect its measured mass & the whole body mass.
2. Multi-frequency Electric Currents

For accurate results of total body water, InBody S10 uses 6 different frequencies(1KHZ, 5KHZ, 50KHZ, 250KHZ, 500KHZ, 1000KHZ) the low frequencies allow accurately measuring of the extracellular water and high frequencies allow accurately measuring of the intracellular water.

3. Eight-Point Tactile Electrodes with Thumb:

Allow segmental analysis & the ability to repeatedly start measurement at a fixed point regardless where the electrodes are placed which increase the accuracy and reproducibility of the results.

4. No Use of Empirical Estimation

InBody S10 uses only the impedance rather than relying on empirical estimations which are based on the averages of statistical data such as age or gender..etc.

Applications

1-Check the patient’s water status.

Segmental water analysis, segmental ECW ratio analysis and all kinds of body composition analysis are provided.

2-Determine whether the dialysis is operative on the patient

Dialysis mode to check before/during/after dialysis state for dialysis patients

3-Determining the patient's Dry Weight.

Dry Weight is the amount which deducts the increased body water from the body weight based on the normal body water ratio.
By examining the Body Water Composition graph, you can identify the exact amount of excess fluid to remove, assess cellular health, and improve your patients' quality of life.

4-Provides diverse analysis useful for all kinds of medical treatment

Visceral fat area which indicates intestinal obesity causing many life style diseases
ECW ratio by segmental showing water balance and help to determine nutritional status of individuals
Segmental lean analysis show muscle adequacy of each segments of the body separately

5-Body Shape & Fitness evaluation
allow you to evaluate and control segmental fat mass or muscle mass.

6-Health Evaluation Tool
As any increase/ decrease in body components such as body water, minerals, proteins, fat,…etc. may be an indicator of a health problem such as Diabetes, Edema, Malnutrition, Sarcopenic Obesity, Osteporosis...etc.

7-Balance Assessment of upper, lower & upper-lower body
This could be helpful for describing suitable exercise/rehabilitation/physical program.

VIDEO

Advantages

High accuracy with high correlation coefficient of 0.984 with DEXA.
handy use with its trans cart and thermal printer
Adhesive Type electrodes are provided for amputee patients in addition to
Touch Type electrodes.
Three different postures adoptable standing, sitting and lying type (Highly preferred for patients in bed )
Direct Segmental Measurement for accurate measurement of the trunk impedance & whole body impedance & mass.
Uses Multi-frequency (1, 5, 50, 250 .500, 1000 KHz) for accurate measurement of body water.
No Use of Empirical Estimations
Simple and fast health care solution: Just enter your height and your weight and let the InBodyS10 do the rest.
Takes only less than two minutes to perform the analysis.
Three different result sheets (A4 result sheet for Body Composition Analysis, A4 result sheet for Body Water analysis in each segment, Thermal result sheet for body composition & body water normal ranges).
Lookin’Body Data Management software and InBody S10 can be easily connected, enabling data entry, management & store through your PC or lab top.
The improved history function to confirm the changes.
Enables storage of 100,000 data that is accessible at any time.

Components

· Adhesive electrodes & Touch Electrodes Lookin' Body Thermal Printer

Result Sheets

Result sheet No.1 : Body Water Analysis

Result sheet No.2 :Body Composition Analysis

Result sheet No.:3 Thermal result sheet (Convenience for outdoor use)

Technical Specifications:

Technology	Bioelectrical Impedance (BIA):30 impedance measurements by using 6 different frequencies (1, 5, 50, 250, 500, 1000) KHZ at each 5 segments of the body(right arm, left arm, trunk, right leg, left leg)
Electrode Method	Tetrapolar 8-Point tactile/adhesive electrode system
Measurement Method	Direct Segmental Multi-frequency Bioelectrical Impedance Analysis Method, DSM-BIA method
Body Composition Calculation method	No use of Empirical Estimation
Outputs(InBody Results Sheet for Body composition )	* Intracellular Water * Extracellular Water * Total Body Water * Protein * Mineral * Soft Lean Mass * Fat Free Mass * Weight * Skeletal Muscle Mass, * Body Fat Mass * Percent Body Fat * BMI * Segmental Lean Analysis * Segmental Water Analysis, * BCM(Body Cell Mass) * BMC(Bone Mineral Content) * AC(Arm circumference) * Waist circumference * Visceral Fat Area * Basal Metabolic Rate(BMR) * Body Water History(12times accumulated results) * Impedance * Phase angle
Outputs(InBody Results Sheet for Body water I )	* Intracellular Water * Extracellular Water * Total Body Water * Weight * Segmental Water Analysis * BMI(Body Mass Index) * Percent Body Fat * Basal Metabolic Rate(BMR) * BCM(Body Cell Mass) * BMC(Bone Mineral Content) * Fat Free Mass * AC(Arm circumference) * Body Water History * Impedance
Types of Result Sheets	Body composition result sheet, Body water result sheet(Ⅰ,Ⅱ)(Printed Paper/Blank Paper) Thermal Result Sheet(when using Thermal Printer)
Setting of Dialysis Mode	Measurement time(before/during/after dialysis), Access position, Paralyzed position set available
Data Storage	· Enables storage of 100,000 data that is accessible at any time.
Applied Rating Current	Under100㎂ (1kHz), 500㎂ (over 5kHz)
Display Type	· 800×480 Touch Color LCD
user Interface	Touch screen and key pad
External Interface	RS-232C 1EA, USB Slave 1EA, USB Host 1EA
Equipment Weight	2kg (4.4lb.)
Testing Time	1min. 50sec.
Testing Weight Rang	10 ~ 250kg (22 ~ 551lb.)
Testing Age Range	3~ 99 years
Height Range	95 ~ 220cm (3ft. 1.4in. ~ 7ft. 2.6in.)

FAQ

What is the importance of using InBody S10 for Dialysis patients?

1.Measure Dry weight

InBody S10 assures you to give accurate water values on each part of your body, which helps in making it possible to calculate correct dry weight

2. Diagnose and monitor the nutrition level for patients

For the dialysis patients with symptoms, such as abdominal dropsy or edema, it is hard to determine the accurate nutritional status. Therefore, many indicators are needed for the determination of the nutritional status.
InBody S10 offers various nutritional information such as (Body Cell Mass (BCM), Arm Circumference, Arm Muscle Circumference (AC or AMC), Visceral Fat Area (VFA), Total Body Water/Fat-free Mass, Muscles Mass, Fat Mass )

3. Monitoring bone Muscle content (BMC)

Chronic Kidney Disease patients have low BMC due to the decrease of calcium and phosphorus in the bones.

What is Dry Weight?

Dry Weight is the amount which deducts the increased body water from the body weight based on the normal body water ratio
By examining the Body Water Composition graph, you can identify the exact amount of excess fluid to remove, assess cellular health, and improve your patients' quality of life.

Is InBody safe for pregnant women?

Yes, it is safe for pregnant women. However, due to the change in their water content, some of the results may not be accurate. Moreover, during the first three months of pregnancy, they should consult their physician prior the test.

K2_TAGS

Read 77069 times

Last modified on 21 February 2018